Ultrasonic Hot Air Combined Drying Equipment LD1808

Ultrasonic hot air combined drying equipment is suitable for the field of food and pharmaceutical drying technology.

Dry lemon slice / Chinese herbal medicine

Advantages of the LD1808 ultrasonic hot air combined drying equipment:

1. Ultrasonic hot air combined drying equipmenteffectively compensates for the shortcomings of the existing hot air drying technology. By adding ultrasonic waves of certain intensity and frequency during the hot air drying process, the material can be kept at higher drying rate at lower drying temperature while improving the drying quality of the material.
2. As an energy form, ultrasonic wave generatescavitation, mechanical and thermal effects when propagating in materials, which can accelerate the heat and moisture migration process of materials. Therefore, LD1808 ultrasonic hot air combined drying equipment effectively improves energy efficiency.  heat pump and hot air combined drying equipment LD1807
3. The equipment is simple and easy to operate. It is only necessary to add ultrasonic generating device and corresponding auxiliary bracket on the basis of the hot air

LD1808 ultrasonic hot air combined dryer

Ultrasonic Hot Air Combined Drying Equipment LD1808

Technical parameters of LD1808 ultrasonic hot air combined drying equipment:

Model	50	100	150	200	300	500	1000
water evaporation Kg/h	50	100	150	200	300	500	100
Size (Ф× H)mm	1600×8900	2400×11500	2400×13500	2800×14800	3200×15400	3800×18800	4600×22500
High pressure pump pressure Mpa	2-10
Power KW	8.5	14	22	24	30	82	30
Inlet air temperature °C	300-500
Product moisture content %	<5 up to 0.5)
Material recovery %	>97
Electric heating KW	75	120	150	When the temperature is lower than 200 degrees, the actual calculation is based on actual calculation.
Electric steam Mpa+kw	0.5+54	0.6+90	0.6+108
Hot air stove Kcal/h	100000	150000	200000	300000	400000	500000	1200000

Structural features of LD1808 ultrasonic hot air combined drying machine:

The outside of the ultrasonic probe bracket is respectively connected with hot air generator and ultrasonic probe, each ultrasonic probe is respectively connected with the ultrasonic generator through a connecting cable of the acoustic wave generator and the transducer; the material lifting platform is arranged inside the ultrasonic probe bracket.

Structure diagram 1

Structure diagram 2 / structure diagram 3

1. 1.Hot air generator, 2. Ultrasonic probe Connecting cable for ultrasonic generator and transducer, 4. Super wave generator, 5. Material lifting table, 6. Ultrasonic probe bracket

Working process of LD1808 ultrasonic hot air combined drying equipment:

In the drying process, the material placed on the upper end of the material lifting platform 5 is firstly pretreated by the ultrasonic generator 4, at the same time the distance between the material and the ultrasonic probe 2 is adjusted the number of working columns and the pretreatment time of the ultrasonic probe 2 are controlled; Then, the hot air generator 1 is turned on, meanwhile the ultrasonic generator 4 continues to operate so that the material completes the drying process under the combined action of ultrasonic wave and hot air.

Working principle of LD1808 ultrasonic hot air combined drying device:

As an energy form, ultrasonic wave generates cavitation effect, mechanical effect and thermal effect when propagating in medium, which can enhance the heat and mass transfer process of the material and accelerate the water migration process in the material. Therefore, the ultrasonic wave and the hot air drying are organically combined, ultrasonic wave and hot air combined drying can effectively compensate for the lack of hot air drying so that the material maintains high drying rate at a lower drying temperature, it can effectively prevent the appearance deformation, color deterioration and the loss of effective ingredients caused by the excessive drying temperature.

Our services:

1.24 hours consulting service to solve the pre-sale and after-sales problems of users of LD1808 ultrasonic hot air combined drying equipment.

1. Sample testing service, users can bring raw materials to the factory for testing and visit our factory.
2. According to the customer’s factory scale and production requirements, etc.Wecan provide the most reasonable production equipment scheme.
3. According to the material cost of the customer, the general formulation can be well prepared.
4. Safe packaging.
5. LD1808 ultrasonic hot air drying equipmentis guaranteed for one year.

UK customer visit / Brazilian customer visit

So far, our products have been exported to more than 20 countries and regions. In the Middle East, Africa, Southeast Asia and other places have equipment produced by our Leader Microwave Equipment. It is our principle to produce high quality equipment and provide perfect service. It brings us friendship and good reputation with customers. Welcome to contact us.

Ultrasonic Hot Air Combined Drying Equipment LD1808