Aquatic Product Microwave Thawing Device

Many aquatic products to be processed are frozen and preserved. They need to be thawed before processing. However, many thawing equipments have poor thawing effect and poor thawing uniformity. The same thawing device is generally thawed synchronously, and the final processed aquatic products are prone to deterioration.

Aquatic Product Microwave Thawing Device

Frozen seafood

Advantages of the aquatic product thawing device:

1. Microwave thawing equipment, the metal shielding door can reflect the microwave leaking into the feeding suppression chamber and the discharge suppression chamber back into the device,further, under the premise of the total length of the device, the length of the feed suppression chamber and the discharge suppression chamber can be greatly reduced, the length of the heating chamber can be increased, thereby increasing the effective space utilization rate;
2. Our seafood microwave thawing equipment, the metal shielding door reflects the microwave in the feed suppression chamber or the discharge suppression chamber, illuminates the material in the feed suppression chamber or the discharge suppression chamber to avoid the loss of microwave energy, increase energy utilization and increase productivity;
3. The method of using the microwave thawing equipmentis convenient, and the structure of the split microwave thawing equipment adopts a detachable connection. After the equipment is debugged in the production workshop, the package is decomposed and transported to the customer’s site for direct installation, which reduces the installation time of the customer, reduces the work intensity of the installer, and reduces the impact of on site welding deformation on the equipment;
4. Seafood microwave thawing equipment,under the premise of the total length of the equipment, increase the length of the heating chamber, increase the effective space utilization, reduce equipment costs, increase equipment thawing capacity. The slot antenna and the polygonal heating cavity are arranged to make the material thawing more uniform, and the loss of microwave energy can be avoided and the energy utilization rate is increased.
5. The use of microwave thawing equipment, not only can effectively prevent microwave leakage, but also can make the microwave thawing more uniform, can improve the thawing efficiencyand increase energy utilization.

Aquatic product microwave thawing device

Structure Figure 1

Structure Figure 2

1. thawing water tank, 2, rack, 3, storage beam, 4, outletpipe, 5, connecting pipe, 6, intake pipe, 7, gas vent, 8, feed trough, 9, water tray, 10, drainage hole.

Structural composition of the aquatic product thawing device:

The raw material thawing device (see figure 1, figure 2) includes a thawing water tank 1, a rack 2, and the rack is connected to the upper end of the thawing tank near the rear side, and the rack is provided with a plurality of layer layers, each layer including a row of storage beams 3; The bottom surface of the thawing water tank is installed with a plurality of vertically disposed outlet pipe, the lower end of outlet pipe is connected with the connecting pipe 5, the connecting pipe is connected with intake pipe 6, the intake pipe is connected with the air blower, a one-way air outlet valve is installed in the air hole. The thawing tank is equipped with a lifting and hoisting feed trough 8 adapted to the inner wall of the thawing tank, the feed trough has a mesh structure, there are several jacks corresponding to the outlet pipe on the feed trough, the jack is set on the outlet pipe. A lot of drawstrings are connected to the bottom surface of the feed trough near the edge, and the end of the drawstring is hung outside the thawing water tank.The thawing water tank has a rectangular structure, and the inner wall of the thawing water tank is inclined from the bottom to the top. A water tray 9 is installed below the lower shelf of the rack, and a drainage hole 10 is provided at a corner of the water tray.

Canadian customer visit

Our services:

1. We provide technical advice.
2. We provide detailed design of your factory; we can not only provide aquatic productmicrowave thawing equipment, but also Siraitia grosvenorii microwave drying equipment.
3. We supply spare parts for a long time.
4. We provide 24 hour service.

Through numerous collaborations and services with international partners, our Leader Microwave Equipment Company simplifies the right procedures and processes, develops expertise in the field of thaw and delivers the highest quality products to every corner of the world. Please contact us if you have any needs.

Aquatic Product Microwave Thawing Device