For the treatment of organic waste, such as kitchen or industrial wastewater, it is usually through some chemical treatment methods to neutralize, oxidize and reduce the chemical contaminants (such as detergents) contained therein. After that, it is led to the sewage treatment tank, and the microorganisms in the pool are used to decompose the residual organic waste, remove the pollution, leave the decomposed sediment in the pool, which is generally referred to as sludge. tunnel type drying and dewatering equipment LD1506
Industrial sludge / conventional high temperature heat pump sludge dryer
Sludge Microwave Drying Equipment LD1507
In the removed sludge, in addition to the organic matter, it also contains a large amount of water. Generally, after some preliminary treatment, the moisture content of the sludge is about 80%-90%. If the water content in the sludge can be reduced, the cost of sludge treatment can be effectively reduced.LD1507 sludge microwave drying equipment can solve the above problems, it reduces energy consumption, improves sludge drying efficiency, improves operating environment, effectively reduces sludge water content, saves floor space and avoids secondary pollution.
The structural composition of LD1507 sludge microwave drying equipment:
The LD1507 sludge drying equipment comprises a screw conveyor, a sludge microwave dryer, a microwave generating device, a dust collecting unit, a spray dust removing machine and a sludge collecting vehicle; the screw conveyor is connected with the inlet of the sludge shaping machine;
Advantages of LD1507 sludge microwave drying equipment:
- The heating efficiency is high, so the drying time can be shortened, thereby reducing energy consumption.
- The drying effect is ideal, the sludge moisture content is small, can reduce the floor space and reduce the secondary pollution rate.
- LD1507 sludge microwave drying equipmentused in the microwave device and can be more uniform drying of complex shapes of materials.
- LD1507 microwave sludge drying equipmentto make material that the water content distribution is not uniform has uniform moisture.
- LD1507 sludge microwave drying equipmentusing electric wave heating, so the energy control is not slow, it is easier to achieve automatic control.
- LD1507 sludge microwave drying equipmentonly heats up the dried material, does not heat the furnace wall, and the cold drying furnace can improve the working environment.
Sludge Microwave Drying Equipment
Structural features of LD1507 sludge microwave drying equipment:
The LD1507 sludge microwave drying equipment has a sludge shaping machine and a conveyor belt. The outlet of the sludge shaping machine communicates with the inside of the sludge microwave dryer; the microwave generating device is connected to the sludge microwave dryer through the waveguide; The dust collection unit includes a cyclone dust collector, a rotary dust discharge gate, and an exhaust fan. The inlet of the exhaust fan is connected with the cyclone dust collector through a pipeline, and the cyclone dust collector passes through an array of rotary dust discharge gates and the pipeline and the sludge microwave dryer. The spray dust remover comprises a sprayer, a washing liquid pump and a water tank. The sprayer is located above the water tank, the inlet of the washing liquid pump is connected with the water tank, the outlet of the washing liquid pump is connected with the sprayer, and the sprayer is also connected with the outlet of the exhaust fan; The sludge collection vehicle is located at the outlet of the sludge microwave dryer.
Schematic diagram of LD1507 sludge microwave drying equipment
10 screw conveyor, 20 sludge microwave dryer, 21 sludge shaping machine, 22 conveyor belt, 24 waveguide tube, 30 sludge, 31 microwave generator, 40 sludge collection vehicle, 50 dust collection unit, 51 cyclone Dust collector, 52 rotary dust discharge, 53 exhaust fan, 60 spray dust collector, 61 sprayer, 62 washing liquid pump, 63 sink
Technical parameters of LD1507 sludge microwave drying equipment:
| Power | 380V50Hz3 phase 4 line | Input voltage（V） | 380 |
| Microwave frequency (MHz) | 2450±50/915±50 | Output power（KW） | 160(support customization) |
| Microwave power（KW） | 160(support customization) | Power control accuracy | Programming digital input，<±2% |
| Cabinet color | Silver white（support customization） | Material | Industrial grade stainless steel |
| Microwave leakage（mW/cm2） | ≤1 | Temperature control accuracy | Self-control，<±1℃ |
| Cabinet temperature（℃） | <45 | Magnetron life | ≥5000 hours |
| Daily capacity | 8T-10T | Transmission speed | 0-5m/min (adjustable) |
| Cooling method | Water cooling or other | Working capacity | 300-400kg/h |
| Working method | Completely continuous | Size | 10500x840x1800mm |
Work flow of LD1507 sludge microwave drying equipment:
The LD1507 sludge microwave drying equipment transports the sludge upwards to the inlet of the sludge shaping machine by a screw conveyor. The sludge shaping machine takes the sludge conveyed by the screw conveyor and shapes the sludge into a sheet or cylinder. The body is then passed through the outlet of the flake or cylindrical sludge into the sludge microwave dryer and placed on a conveyor belt in the sludge microwave dryer.The sludge located on the conveyor belt in the sludge microwave dryer is heated and dried by the microwave energy generated by the microwave generating device through the waveguide, and the dehydrated sludge is dropped from the sludge microwave dryer exit to the sludge collection vehicle. The hot air, moisture and dust generated during the drying process are separated by an array of rotating dust discharge gates, enter the cyclone dust collector through the pipeline, and then sent to the spray dust collector through the exhaust fan; The washing liquid pump pressurizes the washing liquid in the water tank into the sprayer of the spray duster, atomizes and blows so that the moisture and dust entering the spray duster absorb the mist and then fall into the water tank. The washing liquid pump pressurizes the washing liquid in the water tank into the sprayer of the spray duster, and atomizes and blows, so that the moisture and dust entering the spray duster absorb the mist and then fall into the water tank.After the hot air is sprayed, the temperature is lowered and cooled, the clean air for removing moisture and dust is discharged from above the spray dust remover.
Our service:
- Our LD1507 sludge microwave drying equipmentand LD1927 microwave tunnel type Tenebrio molitor drying and puffing equipmentare guaranteed for one year and are free of maintenance for life.
- We install and adjustthe equipment free of charge and standardize the training for users.
- We have a professional after-sales service team to serve customers 24 hours a day through the after-sales service line.
Customer visit
Leader Microwave Equipment Company has advanced production equipment, professional manufacturing level and comprehensive technical management team. In the field of microwave drying equipment manufacturing, we always pay attention to every detail in production. We strive to improve every process from market research, information feedback, product development, quality inspection and sales service. Welcome to contact us.
站点标题 